Using Volumetric Cube Mask
Last updated
Last updated
The Volumetric Cube Mask node allows you to create 3D masks within your scene, serving various purposes such as preventing certain areas from being keyed by the Reality Keyer or masking an area.
To set an example, assume that you have a large screen inside your cyclorama, and you want to display content on it. Given that the Reality Keyer will key the entire cyclorama, a specific method is required to mask an area within the 3D space. This is where the Volumetric Cube Mask node becomes a handy tool.
While this section utilizes the Green Screen Virtual Studio as an example pipeline, the approach can also be applied to XR (Extended Reality) projects or for calibration verification purposes.
Construct your Green Screen Virtual Studio node network within the Reality Hub nodegraph.
Add VolumetricCubeMask and Merge nodes to the nodegraph.
Connect the Track output pin of the Xync (or your preferred tracking node) to the Track input of the VolumetricCubeMask node.
Connect the Out output pin of Distort node to the Texture0 input pin of the Merge node.
Connect the Out output pin of the VolumetricCubeMask node to the Texture1 input pin of the Merge node.
Connect the Out output pin of the Merge node to the Clean_Plate_Mask input pin of the RealityKeyer node.
The VolumetricCubeMask node has been integrated into the nodegraph, and the necessary connections have been made, as shown above.
Adjust the transformation properties (Position, Rotation, etc.) of the Volumetric Cube Mask according to your studio setup.
Activate the Advanced Preview Monitor (APM) Channel A on the Mask output pin of the Cyclorama node.
The displayed image indicates that the Mask color is red (1, 0, 0, 1).
The Mask color is determined by the MaskColor property, as shown above.
Activate APM Channel B on the Out output pin of the Merge node, and click on the APM Multiview (A|B) button.
The image above illustrates that the Cyclorama mask color matches the Volumetric Cube Mask color.
The edges around the VolumetricCubeMask are a result of the Smoothness setting.
The next step involves subtracting the VolumetricCubeMask from the Cyclorama.
To do this:
Select the VolumetricCubeMask node and navigate to its Color property.
Change the R value to 0 and set both G and B values to 1.
Now, the Volumetric Cube Mask appears magenta and does not contain any red color information. Therefore, the area it covers will not be keyed in the render.
Navigate to RealityCamera0.Scene output and activate the APM.
